Argon metal processing in the induction furnace

Bottom blowdown in induction furnaces is intended for homogenization and refining of metal with an inert gas, before and during the casting process. Installed directly in the lining of the induction furnace.

The results of the use of bottom blowing metal in an induction furnace:

• improving the solubility of alloying elements;
• removal of deoxidation, dephosphorization and desulfurization products into slag;
• decrease in temperature of metal release by 15-20 ° C;
• improvement of form fillability;
• acceleration of the process of finishing metal;
• finished metal products that have undergone bottom purging have isotropic properties, increased impact strength, reduced reject rate